Disabling A Feature Set - Tait TB8100 User Manual

Disabling a Feature Set

52 Part C: Basic Tasks
Feature sets are not normally disabled. However, disabling may be desirable in
special circumstances, for example, if you are trying out the feature set and
decide not to purchase it.
Disabling the Alarm Reporting Feature Set
You can only disable this feature set if the base station does not use it.
A disabled feature set can only be re-enabled by
Important:
purchasing a new license key. The original feature license key
cannot be re-used.
1. Check the Reciter Serial Number box to make sure that you are logged
on to the correct base station.
2. Make sure that communications with the Alarm Center (Configure >
Communications > Alarm Center) and communications using email
(Configure > Communications > Email) are disabled.
3. Go into Standby mode.
4. Select Tools > Software Feature Enabler.
5. Select the feature set's row.
6. Click Disable.
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.
Disabling the Advance Profiles and Task Manager Feature
Set
You can only disable this feature set if the base station does not use it.
A disabled feature set can only be re-enabled by
Important:
purchasing a new license key. The original feature license key
cannot be re-used.
1. Check the Reciter Serial Number box to make sure that you are logged
on to the correct base station.
2. Make sure that no channels use customized channel or signalling profiles. (In
other words, they all use default profiles.)
3. Make sure that there are no more than 40 enabled task manager tasks.The
number of enabled Task Manager tasks is displayed in all Task Manager
forms. If necessary, disable unneeded tasks until the total number is 40 or
less.
4. Go into Standby mode.
5. Select Tools > Software Feature Enabler.
6. Click the feature set's row.
7. Click Disable.
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.
MB8100-00-00-806 © TEL 2003