Customizing The Default Signalling Profile - Tait TB8100 User Manual

Customizing the Default Signalling Profile

90 Part F: Configuring Channels
The Edit Signalling Profile dialog box lets you modify the default signalling
profile to suit your system. Some items display 'See channel table.' You
configure them in the
different values.
To customize the default signalling profile
1. Select Configure > Base Station > General.
2. In the Default profiles area, click Signal Profile. The Edit Channel Profile
form appears.
Nothing in the Subaudible Signalling tab can be configured. Subaudible sig-
nalling is defined for each channel in the channel table. The tone table is
only available for custom profiles.
3. In the Tx Timers tab, configure the way the audio, signalling, and carrier
end at the end of a transmission. You can also enable transmit lockout and
anti-kerchunking.
4. In the Advanced tab, check that the settings for
5. Click OK to confirm your changes and return to the General form.
channel table so that you can give different channels
CTCSS gating are suitable.
MB8100-00-00-806 © TEL 2003