Reel Unit - Epson SC-S30600 Series Service Manual

SC-S30600 Series

3.4.9 Reel Unit

3.4.9.1 Reel Unit
1. Remove the seven screws, and remove the Reel Unit.
A) Special screw: 7 pcs
When installing the Reel Unit, confirm the following.

On the left side of the Reel Unit, insert the dowel of the frame
into the positioning hole on the Reel Unit.

On the right side of the Reel Unit, insert the dowels of the frame
into the positioning grooves of the Reel Unit.
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure
- Outside -
A
A
- Inside -
A
Positioning hole and dowel
Reel Unit
Figure 3-150. Removing the Reel Unit
Revision B
Dowel and positioning groove
A A
Dowel and positioning groove
A
A
184
Confidential