Epson SC-S30600 Series Service Manual page 252

SC-S30600 Series
4.11.5.2 Head Inclination Manual Adjustment (CR direction)
1. Load the paper into the printer.
2. Turn the printer ON.
3. Start the Service Program and select
direction).
4. Click [Run].
The adjustment pattern is printed.
Figure 4-39. [Head inclination manual adjustment (CR direction)] Screen
5. Examine the printed pattern.
6. Make the adjustment referring to
direction)" (p252).
ADJUSTMENT
Head inclination manual adjustment (CR
"4.11.5.3 Correcting Head Inclination (CR
Head Related Checks and Adjustments
OK
Paper feed
direction
NG
NG
Figure 4-40. Judgement
4.11.5.3 Correcting Head Inclination (CR direction)
1. Press the F11 key of the keyboard to unlock the CR unit.
2. Move the CR unit to the left end of the printer.
3. Remove the CR Cover.(P. 119)
4. Loosen the three screws (A, B, C) that secure the Damper Kit.
5. Loosen the three screws (D, E, F) that secure the Head Holder.
6. Loosen the screw (G) (Bit No. 1) that secures the Adjustment Knob.
Be careful not to completely remove the screw that secures the
C A U T I O N
Adjustment Knob.
7. Turn the Adjustment Knob to correct the head inclination.
See Figure 4-41 for which direction to turn the knob.
Revision B
Misalignment within one-dot's width is OK.
Confidential
252