Epson SC-S30600 Series Service Manual page 289

SC-S30600 Series
[Lubrication 2]
Part Name CR Slider
Lubricants (Part Code) G-84 (1516265)
2 mm x 7 mm
Amount
2 mm injector
Lubrication Tool
Apply the lubrication to the portion of the CR slider where it contacts
Lubrication Manner with the secondary axis.
Using an injector, apply lubricant so as to fill in the band.
Note Be careful not to apply lubricant beyond the specified point.
Lubrication Point
MAINTENANCE
[Lubrication 3]
CR Slider
Lubrication
Part Name ROLL PAPER HOLDER (RIGHT/LEFT)
Lubricants (Part Code) G-81 (1574337)
Amount 25 mm x 76.7 mm
Lubrication Tool Flux dispenser
Using a flux dispenser, apply lubricant to the portion of the Roll paper
Lubrication Manner
holder where it contacts with the axis.
Note ---
Roll Paper Holder
Revision B
Lubrication Point
289
Confidential