Epson SC-S30600 Series Service Manual page 178

SC-S30600 Series
3.4.8.3 Roll Paper Holder
1. Remove the C-ring (, and remove the Roll Paper Holder.
Before installing the Roll Paper Holder on the left, install the
holder and the spring as shown in the figure below.
- Left side -
Spring
When replaced with a new part, make sure to lubricate the new one
Lubrication Lubrication
referring to"5.6 Lubrication"
DISASSEMBLY & ASSEMBLY
Holder
(p288).
Disassembly and Assembly Procedure
Roll Paper Holder
R Roll Unit
Figure 3-142. Removing the Roll Paper Holder
Revision B
Roll Paper Holder
C-ring
L Roll Unit
178
Confidential