Lubrication - Epson SC-S30600 Series Service Manual

SC-S30600 Series

5.6 Lubrication

LUBRICATION
This section describes necessary lubrication to maintain the functions and performance
of this printer. Make sure to properly lubricate the parts/units specified in this section
as necessary when replacing or maintaining them.

Make sure to perform the lubrication following the specified
C A U T I O N
lubrication points, lubricants, and amount. Otherwise, the
printer may not operate normally.

When lubricating the originally installed parts, first wipe off
the old lubricant completely.
LUBRICATION POINTS LIST
Lubrication
Corresponding Part Name of Lubricant
No.
Part name: G-84
Part code: 1516265
OIL PAD HOLDER
1
(RIGHT/LEFT)
Part name: O-17
Part code: 1521154
Part name: G-84
2 CR UNIT
Part code: 1516265
ROLL PAPER
Part name: G-81
3 HOLDER
Part code: 1574337
(RIGHT/LEFT)
MAINTENANCE
[Lubrication 1]
Part Name
Lubricants (Part Code)
Amount
Lubrication Tool
Lubrication Manner
Note
Lubrication Tool Reference
2 mm injector
p.288
2 mm injector
p.289
Flux dispenser p.289
Lubrication
Oil pad holder (Right/Left)
1. G-84 (1516265)
2. O-17 (1521154)
1. 0.6 cc
2. Oil only: 0.09 - 0.11g, Pad included: 0.11 - 0.13g
2 mm injector
Take out the Oil pad holder.
1. Apply the lubrication with an injector.
2. Soak the oil pad with oil.
Be careful not to apply lubricant beyond the specified point.
Oil Pad Holder
Lubrication Point 2
Revision B
(p154)
Lubrication Point 1
288
Confidential