Epson SC-S30600 Series Service Manual page 122

SC-S30600 Series
10. Remove the FFC clamp.
11. Remove the three screws, and remove the Print Head.
C) Silver M3x8 screw (Bit No.1): 3 pcs
12. Disconnect the Head FFCs from the Print Head.
Make sure to connect the Head FFCs straight and all the way
seated in the connector.
DISASSEMBLY & ASSEMBLY
FFC clamp
Disassembly and Assembly Procedure
Head FFCs
C
Print Head
C
C
Figure 3-68. Removing the Print Head
Revision B
CR Unit
122
Confidential