Epson SC-S30600 Series Service Manual page 42

SC-S30600 Series
Code Error Name
Abnormally-long driving duration of the APG Motor
was detected.
APG Motor
151D

driving time-out error Irregular load

Firmware becomes out of control.
The APG Motor was driven at a speed abnormally
faster than a predetermined one during acceleration or
deceleration.
APG Motor

Irregular load
151E
velocity deviation error

APG encoder failure

APG Motor failure

APG Motor driver failure

Connection failure of the APG Motor.

The APG Motor was driven at a speed abnormally
slower than a predetermined one during operation.
APG Motor
151F

lock error Irregular load

APG encoder failure

APG Motor failure
ATC Motor The control terminal (Vre terminal) of the ATC Motor
1599
oscillation error driver has shorted out.
Overcurrent to the ATC Motor was detected.

ATC Motor cable disconnection.
ATC Motor

159A Irregular load
overload error

ATC Motor encoder failure

ATC Motor failure
The ATC Motor was driven at a speed faster than a
predetermined one during deceleration.

Irregular load
ATC Motor
159B

over speed error ATC Motor encoder failure

Sub-F Board failure

APG Motor driver failure
The number of occurrences of reversing the ATC
Motor has reached a predetermined limit.
ATC Motor
159C

reversing error
The polarity of ATC Motor cable is opposite.

ATC Motor failure
TROUBLE SHOOTING
Cause
Is there any problems such as damaged cable in the
connections below?

APG Motor (APG encoder) to Main Board
(CN210/CN23)
1. Is the ATC Motor driver on the Main Board
damaged?
2. Is there any foreign materials around the ATC
Motor driver?
1. Is there any problems such as damaged cable in the
connections below?

ATC Motor to Sub-F Board (CN602/CN604)
2. Does the ATC Motor encoder work properly?
Check it using the Service Program.
Does the ATC Motor encoder work properly? Check
it using the Service Program.
1. Is there any problems such as damaged cable in the
connections below?

ATC Motor to Sub-F Board (CN602/CN604)
2. Does the ATC Motor encoder work properly?
Check it using the Service Program.
Remedies for Service Call Error
Check Item
--- Replace the Main Board.
1. Replace the APG Motor.
---
2. Replace the Main Board.
Replace the APG Motor.
1. Remove the foreign material.
2. If the error still occurs, replace the Main Board.
(Page 107)
Replace the ATC Motor.
1. Replace the ATC Motor.
2. Replace the Sub-F Board.
3. Replace the Main Board.
Replace the ATC Motor.
Revision B
Remedy
(Page 107)
(Page 138)
(Page 107)
(Page 138)
(Page 181)
(Page 181)
(Page 179)
(Page 107)
(Page 181)
42
Confidential