Epson SC-S30600 Series Service Manual page 106

SC-S30600 Series
3.4.3.15 Front Cover L Sensor
1. Remove the Left Rear Cover. (p94)
2. Remove the Left Upper Cover. (p95)
3. Remove the Left Front Cover. (p97)
4. Disconnect the cable from the relay connector.
5. Release the cable from the clamp.
Relay connector
Figure 3-43. Releasing the Cable
DISASSEMBLY & ASSEMBLY
6.
7.
Clamp
Disassembly and Assembly Procedure
Remove the two screws that secure the Front Cover L Sensor.
A) Silver M3x8 P-tite screw with washer: 2 pcs
Pull out the cable through the hole on the frame, and remove the Front Cover L
Sensor.
Hole
Front Cover L Sensor
Figure 3-44. Removing the Front Cover L Sensor
Revision B
A
106
Confidential