Epson SC-S30600 Series Service Manual page 256

SC-S30600 Series
4.11.6.3 Correcting Head Slant (PF direction)
1. Press the F11 key of the keyboard to unlock the CR unit.
2. Move the CR unit to the left end of the printer.
3. Remove the CR Cover. (P. 119)
4. Loosen the screw that secures the Adjustment Knob.
Be careful not to completely remove the screw that secures the
C A U T I O N
Adjustment Knob.
5. Move the Adjustment Knob to correct the head slant.
See Figure 4-46 for which direction to move the knob.
Adjustment Knob
Screw
Plus direction
Figure 4-46. Correcting the Head Slant
ADJUSTMENT
Minus direction
Head Related Checks and Adjustments
6. Tighten the screw to secure the Adjustment Knob.
7. Print the pattern and see if the slant is corrected. If not, repeat the procedure until
normal pattern is printed.
8. When finished, click [Finish] and turn the printer OFF.
Rear Front
Condition of the head
Paper feed direction
Printed pattern
Rear Front
Adjustment knob
Print Head
Figure 4-47. Adjustment
Revision B
Rear Front
Rear Front
Print Head
256
Confidential