Epson SC-S30600 Series Service Manual page 113

SC-S30600 Series
3.4.4.4 Sub Board
1. Unlock the CR Unit. (p82)
2. Remove the Left Rear Cover. (p94)
3. Remove the Left Upper Cover. (p95)
4. Remove the CR Cover. (p119)
5. Disconnect all cables and FFCs from the Sub Board.
6. Remove the four screws, and remove the Sub Board.
A) Silver M3x8 P-tite screw: 4 pcs
DISASSEMBLY & ASSEMBLY
- Upper side of the CR Unit -
Disassembly and Assembly Procedure
A
A
A
Figure 3-54. Removing the Sub Board
Revision B
Sub Board
A
113
Confidential