Boards Related Checks And Adjustments - Epson SC-S30600 Series Service Manual

SC-S30600 Series

4.14 Boards Related Checks and Adjustments

4.14.1 RTC&USB ID Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Start the Service Program and select
3. Check the Date and Time displayed, and correct them if necessary.
4. Click [Write RTC] to set the RTC.
5. Enter the 10-digit serial number of the printer to generate a USB ID.
6. Click [Write USB ID] to write the USB ID.
7. Click [Finish].
8. Turn the printer OFF.
9. Turn the printer on in the normal mode.
10. On the control panel, verify that the setting has been correctly applied.
If the setting is incorrect, set the date and time on the control panel.
11. Turn the printer off.
If the printer is turned OFF and back ON after changing the USB
C A U T I O N
ID, the computer (Windows) detects the USB port as a new port
and automatically copies the printer driver as xxxx (copy x). If you
need to perform another adjustment using this tool, select the
"copy x" driver.
ADJUSTMENT
RTC&USB ID Input.
Boards Related Checks and Adjustments
Figure 4-57. [RTC&USB ID Input] Screen
Revision B
264
Confidential