SC-S30600 Series
3.4.5.17 Flushing Box
1.
Unlock the CR Unit.
(p82)
2.
Remove the Media Loading Lever.
3.
Remove the Panel Unit.
(p86)
4.
Remove the Right Upper Cover.
5.
Remove the Right Front Cover.
(p91)
6.
Move the CR Unit to a position over the platen.
When disconnecting the Waste Ink Tubes in the next step, the ink
C A U T I O N
may drip off from the tube. Prepare a waste cloth or the like in
advance and be careful not to contaminate the surroundings.
7.
Disconnect the two Waste Ink Tubes from the two joints.
8.
Disengage the hook, and remove the two banding bands.
Do not cut the banding bands as they can be reused.
C A U T I O N
DISASSEMBLY & ASSEMBLY
(p158)
(p88)
Disassembly and Assembly Procedure
A
Waste Ink Tubes
Banding Bands
Figure 3-103. Removing the Waste Ink Tubes and Banding Bands
Revision B
Flushing Box
Joints
Confidential
149