Epson SC-S30600 Series Service Manual page 159

SC-S30600 Series
3.4.6.2 Media Loading Lever Sensor
1. Move the Media Loading Lever to the rear side, and set it to the release position.
2. Disconnect the connector of the Reel Unit.
3. Remove the five screws, and remove the Right Rear Cover.
A) Silver M4x10 S-tite screw with washer: 4 pcs
B) Silver M3x6 screw: 1 pcs
A
B
Reel Unit
Connector
A
Figure 3-115. Removing the Right Rear Cover
DISASSEMBLY & ASSEMBLY
Right Rear Cover
A
A
Disassembly and Assembly Procedure
4. Remove the six screws that secure the Rear Cover.
C) Silver M3x8 S-tite screw with built-in washer: 6 pcs
C
C
Figure 3-116. Removing the Rear Cover
5. Disconnect the connector from the Media Loading Lever Sensor.
Connector
Figure 3-117. Connector of the Media Loading Lever Sensor
Revision B
Rear Cover
C
C
C
C
Media Loading Lever Sensor
Confidential
159