Epson SC-S30600 Series Service Manual page 138

SC-S30600 Series
3.4.5.12 APG Motor
When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p200)
perform the specified operations including required adjustment.
1. Remove the Media Loading Lever.
2. Remove the Right Upper Cover.
3. Remove the three screws that secure the APG Unit.
A) Silver M3x6 S-tite screw with built-in washer: 3 pcs
For the screw marked with a red circle in Figure3-87, use a stubby
C H E C K
P O I N T driver to remove it.
Insert the positioning hole of the APG Unit over the rib of the
frame.
Positioning hole and rib
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p158)
(p88)
APG Unit
Positioning hole and rib
Disassembly and Assembly Procedure
- Right side -
APG Unit
A
A
A
Figure 3-87. APG Unit Fixing Screws
Revision B
138
Confidential