SC-S30600 Series
8.
Remove the two Compound Gears.
Be careful not to damage the encoder and scale of the Reel Motor in
C A U T I O N
the next step.
Scale
Encoder
9.
Remove the two screws, and remove the Reel Motor.
B) Silver M3x6 S-tite screw with built-in washer: 2 pcs
Make sure to install the Reel Motor in the correct orientation
checking the connector position.
DISASSEMBLY & ASSEMBLY
Reel Motor
Connector
Disassembly and Assembly Procedure
Compound Gears
Figure 3-157. Removing the Compound Gears
Reel Motor
B
B
Figure 3-158. Removing the Reel Motor
Revision B
189
Confidential