Epson SC-S30600 Series Service Manual page 193

SC-S30600 Series
3. Release the cable and power cable of the Drying Fan Unit from the clamp.
4. Disconnect the power cable of the Drying Fan Unit.
5. Remove the two screws that secure the Drying Fan Unit.
A) Special screw: 2 pcs
6. Remove the Drying Fan Unit in the direction of the arrow.
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure
Drying Fan Unit
- Bottom -
A
Figure 3-162. Removing the Drying Fan Unit (front side)
Revision B
Power Cable
Clamps
Cable
193
Confidential