Adjustment Items And The Order By Repaired Part - Epson SC-S30600 Series Service Manual

SC-S30600 Series

4.1.2 Adjustment Items and the Order by Repaired Part

The following table shows the required adjustments by repaired or replaced part and the order in which the adjustments must be performed.
NOTE 1: The adjustments required for the Main Board differs depending on whether the NVRAM on the old board can be backed up or not.
2: When the firmware update is required, first check the version of firmware currently installed on the printer, then update the firmware if necessary.
Replaced or Repaired
Class
(Reattached) Part/Unit
Periodic
replacement Print Head and Damper Kit
parts
ADJUSTMENT
Table 4-1. Adjustment items and the order by repaired part
Required Operations
1 Turn the power on in normal mode.
2 Dispose of waste ink.
3 Reset the waste ink counter (Maintenance menu)
4 Turn the power off.
Before
5 Turn the power on in Serviceman mode.
replacement
6 Ink eject
7
Tube inner cleaning (Cleaning liquid is primed)
8 Tube inner pressure reduction
9 Auto CR unlock & move CR to full column side
Replacement 10
11 Turn the power on in Serviceman mode.
12 Reset the Print Head Counter.
13 Reset the Ink Holder Counter.
14 Head ID Input
15 PG Adjustment
16 Turn the power on in Serviceman mode.
17 Cleaning liquid eject
After
replacement
18 Initial ink charge
19 Choke cleaning
20 Nozzle Check
21 Head inclination auto adjustment (CR direction)
22 Head slant auto adjustment (PF direction)
23 Auto Uni-d adjustment
24 Auto Bi-d adjustment
Service
Program
---
---
---
---
---


Cleaning cartridge


---



--- Thickness gauge
---








Overview
Jig Media Replaced Reattached



















3M IJ40-10R

3M IJ40-10R

3M IJ40-10R

3M IJ40-10R

3M IJ40-10R
Revision B
Page
---
---
---
---

--- p. 257
--- p. 258

p. 245
---
p. 121
/
p. 120
---
p. 229
---
p. 229
---
p. 246
---

p. 243

p. 257
---
p. 259
---

p. 250

p. 248

p. 251

p. 254

p. 241

p. 242
200
Confidential