Epson SC-S30600 Series Service Manual page 234

SC-S30600 Series
8. Press [MEASURE] on the tensimeter and flip the belt with tweezers or a similar
tool.

Be sure to measure the tension of the belt on the upper side. If
C A U T I O N
you measure the tension of the belt on the lower side, the
measuring value may be inaccurate.

Flip the belt as weak as the tensimeter can measure it.

Be careful not to let the microphone touch the belt when
flipping the belt.
9. Measure the belt tension for three times, and check if the average is within the
standards.

Within the standards: Go to Step 10

Out of the standards: Go to Step 12
10. Click [Finish].
11. Turn the printer OFF to finish the adjustment.
ADJUSTMENT
Measuring microphone
Driven Pulley
CR Related Adjustments
Upper timing belt
Center
(Measurement point)
Figure 4-15. Measuring the belt tension
Revision B
CR Unit
234
Confidential