Epson SC-S30600 Series Service Manual page 128

SC-S30600 Series
3.4.5.6 CR FFC
1. Remove the Media Loading Lever.
2. Remove the Panel Unit. (p86)
3. Remove the Right Upper Cover.
4. Remove the Left Rear Cover. (p94)
5. Remove the Left Upper Cover. (p95)
6. Remove the Upper Cover. (p100)
7. Remove the CR Cover. (p119)
8. Remove the Damper Kit. (p120)
9. Remove the Print Head. (p121)
10. Remove the Head FFC. (p123)
11. Remove the Board Box Cover. (p101)
12. Disconnect the CR FFC from the connector on the Sub Board.
13. Disconnect the CR FFC from the Ink Path Holder Assy.
Sub Board
Figure 3-76. Releasing the CR FFC
DISASSEMBLY & ASSEMBLY
(p158)
(p88)
Ink Path Holder Assy
CR FFC
Disassembly and Assembly Procedure
14. Release the CR FFC from the FFC Holders.
CR FFC
Figure 3-77. Releasing the CR FFC
Revision B
FFC Holder
128
Confidential