Arctic Cat 1000 XT 2014 Service Manual page 89

11. Install the intake manifolds and tighten to 8 ft-lb;
then install the throttle body and secure with the hose
clamps.
GZ099A
12. Connect the fuel injector, TPS connector (A), MAP
sensor connector (B), and ISC valve connector (C).
GZ372
13. Install the shift linkage with bushings and secure
with E-clips.
14. Connect the gasline hose connectors to the fuel rails;
then install any nylon ties that were removed during
disassembly.
GZ106
15. Install the air filter housing and secure to the throttle
body with a hose clamp; then connect the IAT sensor
connector.
GZ107
GZ090B
GZ094A
GZ124
87