Arctic Cat 1000 XT 2014 Service Manual page 136

3. Remove the input shaft from the input housing; then
remove the oil seal.
134
GZ392
4. Remove the snap ring retaining the input bearing and
using an appropriate bearing driver, press the bearing
from the housing.
GZ176A
Cleaning and Inspecting
1. Wash all parts in parts-cleaning solvent and dry with
compressed air.
Always wear safety glasses when working with com-
pressed air.
2. Clean all gasket material and sealant from mating
GZ177
surfaces.
3. Inspect bearings, shafts, and housing for excessive
wear, cracks, or discoloration.
4. Inspect the clutch basket for wear in splines or cracks
in the housing.
GZ180
5. Inspect the clutch pack for signs of discoloration.
! WARNING
GZ182A
GZ184A
GZ178A