Arctic Cat 1000 XT 2014 Service Manual page 121

15. Push the axle shaft firmly toward the differential to
release the internal lock; then while holding the axle
in, pull the CV cup from the differential.

NOTE: Keeping the axle level will aid in removal.
CAUTION
Do not attempt to use a slide hammer or damage will
occur.
16. Remove the inner fender panels.
17. Using a T-30 torx wrench, remove the three screws
securing the front drive actuator to the gear case;
then remove the actuator.
18. Remove the lower differential mounting cap screw.
Account for a lock nut and washers.
AF610D
19. Remove the upper differential mounting cap screws.
20. Free the differential assembly from the frame mount-
ings; then shift the differential assembly forward
enough to disengage the front driveshaft from the
output yoke.
PR729C
21. Place the differential on its right side; then remove it
from the frame.
AG925
CD026
CD016
KX161
119