Arctic Cat 1000 XT 2014 Service Manual page 125

5. Remove the left differential bearing flange assembly
and account for a shim. Mark the shim as left-side.
6. Place the differential with the open side down; then
lift the housing off the spider assembly. Account for
shim(s) and mark as right-side.
KX175
Disassembling Pinion Gear
1. Remove the internal snap ring securing the pinion
bearing in the housing.
KX177
2. Using the Pinion Gear/Shaft Removal Tool and a
hammer, remove the pinion gear from the gear case
housing.
KX178
3. Secure the pinion gear in a bearing puller; then
remove the pinion bearing using a press. Account for
a collar and a bearing.
KX179
KX181
WC430
CC878
123