Arctic Cat 1000 XT 2014 Service Manual page 41

12. Remove the exhaust pipe springs at the muffler and
remove the muffler. Account for the grafoil seal.
13. Remove the nuts securing the rear exhaust pipe to the
cylinder; then remove the springs securing the rear
exhaust pipe to the front exhaust pipe and remove the
rear exhaust pipe. Account for a grafoil seal on the
pipe juncture and a seal in the cylinder.
14. Remove the front and rear spark plug wires from the
spark plugs; then disconnect the primary wire con-
nectors from the coils and remove the coils from the
left side of the frame.
GZ374
15. Remove the cap screw securing the engine and har-
ness grounds to the engine.
GZ372
16. Remove the cap screws securing the upper bumper
support to the frame and swing the bumper forward
allowing access to the radiator drain plug.
17. Place a suitable drain pan under the radiator; then
GZ099A
remove the radiator drain plug. Do not loosen the
radiator cap at this time.
GZ071A
GZ064A
GZ068
39