Arctic Cat 1000 XT 2014 Service Manual page 26

3. Remove four reinstallable rivets securing the steer-
ing post cover and remove the cover.
4. Unlatch the storage compartment lid; then slide the
storage compartment cover assembly forward and
lift off.
5. Remove the storage compartment.
24
6. Remove the four cap screws securing the handlebar
caps and LCD gauge bracket to the steering post;
then move the handlebar and gauge out of the way.
Account for four handlebar caps.
FI465A
7. Remove two cap screws securing the upper steering
post bearing to the frame. Account for two housings.
FI466A
8. Using a suitable lift stand, raise the ATV enough to
remove the front wheels.
9. Remove the left front shock absorber; then remove
the cap screws and nuts from the steering post to the
EPS couplers.
FI467A
10. Pull upward on the handlebar to disengage the upper
coupler from the EPS assembly.
11. Disconnect the 2-pin and 8-pin connectors from the
top of the EPS housing.
FI468
CD762
CD760
EPS005A