Arctic Cat 1000 XT 2014 Service Manual page 85


NOTE: It will be necessary to rotate the crankshaft
back and forth to engage the teeth of the oil pump
and countershaft gears.
6. Install the input shaft through the case half.
7. Apply a generous amount of molybdenum grease to
the sholder of the shaft just past the splines.
8. Install the gear shift shaft into the crankcase making
sure the flat washer is in place on the right case end
and the spacer on the gear shift stop end.
GZ474
9. Place the larger flat washer on the drive gear end of
the countershaft and the smaller flat washer on the
high driven gear end; then with shift forks and shift
fork shaft, install the countershaft assembly into the
crankcase.
GZ521
10. Engage the shift forks into the gear shift shaft and
push the shift fork shaft into the crankcase.
DE677A
GZ335
GZ280B
GZ336
83