Arctic Cat 1000 XT 2014 Service Manual page 65

4. If removed, install the shim (E) and cam stopper (F); then
with the cam stopper support (B) in place, install the
spring (C), washer (D), and nut (A). Tighten to 8 ft-lb.
5. Install the shift cam stopper spring onto the shift cam
stopper and secure with a flat washer and nut. Tighten
to 8 ft-lb.
H2-023
6. Install the shift cam plate onto the shift cam shaft and
secure with the cap screw. Tighten to 8 ft-lb.
GZ254
7. Install the shift shaft into the crankcase making sure
the washer is properly located; then align the timing
reference marks and completely seat the shift shaft.
FW-017B
GZ256
H2-019
H2-022A
FW-019
H2-026
63