Arctic Cat 1000 XT 2014 Service Manual page 68

5. Remove the fixed drive face.
6. Remove the cap screws securing the V-belt housing to
the crankcase; then remove the V-belt housing.
Account for two alignment pins.
7. Remove the cap screws securing the clutch cover;
then using a rubber mallet, carefully remove the cover.
Account for two alignment pins.
8. Using a suitable press, remove the clutch housing
from the clutch cover. Account for the fixed drive
face spacer and O-ring.
66
PR388
9. Remove and retain the two machine screws and bear-
ing retainers.
GZ246A
10. Using a suitable press, remove the bearing from the
clutch cover.
GZ246B
GZ511
CC596
GZ500
GZ507