Arctic Cat 1000 XT 2014 Service Manual page 82

3. Remove the reverse driven gear dog.
4. Remove the snap ring securing the reverse driven gear
and washer; then remove the washer and gear.
5. Remove the reverse driven washer; then remove the
low driven gear locking washer.
80
GZ312
6. Remove the low driven gear. Account for a bearing,
GZ313A
bushing, and thrust washer.
Assembling
GZ314
1. From the drive gear end, install a thrust washer, bush-
ing, and bearing; then install the low driven gear and
washer.
GZ320
GZ319
GZ318A
GZ316
GZ317A