Call Management Features; Automatic Off-Hook Call Placement; Call Hold - Polycom SoundPoint IP 301 Administrator's Manual

Administrator Guide - SoundPoint

3.2 Call Management Features

3.2.1 Automatic Off-hook Call Placement

The phone supports an optional automatic off-hook call placement feature for each
registration.
Central
(boot
server)
Local

3.2.2 Call Hold

Call hold is a fundamental feature of the phone. The purpose of hold is to pause activ-
ity on one call so that the user may use the phone for another task, such as to make or
receive another call. Network signaling is employed to request that the remote party
stop sending media and to inform them that they are being held. A configurable local
hold reminder feature can be used to remind the user that they have placed calls on
hold.
Central
(boot
server)
42
® ®
IP / SoundStation IP
Configuration file: Specify which registrations have the feature and what
phone1.cfg contact to call when going off hook.
•
Web Server None.
(if enabled)
Local Phone User None.
Interface
Configuration file: Specify whether RFC 2543 (c=0.0.0.0) or RFC 3264 (a=sen-
sip.cfg donly or a=inactive) outgoing hold signaling is used.
•
Specify local hold reminder options.
•
Copyright © 2005 Polycom, Inc.
For more information, see 4.6.2.2.2 Automatic Off-
hook Call Placement <autoOffHook/> on page 132.
For more information, see 4.6.1.1.3 SIP <SIP/> on
page 75.
For more information, see 4.6.1.12.2 Hold, Local
Reminder <hold/><localReminder/> on page 109.
Features