Ignore Autofr; Password Setup - Printronix T2N series User Manual

Save to SD Card
Selecting "Save to SD Card" saves the next print job to SD with the file name entered in the "File
Name" field. Print jobs are determined by the data input timeout. Once a print job is saved to the SD
card, subsequent print jobs print normally.
Save to File
This method of capturing data is a two-step process in which data sent to the printer is captured
instead of printed. First click the "Set" button to place the printer in Capture mode. When the
"Confirm" window opens, do not click the OK button until the print job is sent. The printer will store the
print job within an internal buffer to be uploaded into a file later.
Note: While the Configuration Utility is waiting for confirmation, an alternate means of sending data to
the printer can be used. This means launching another Configuration Utility, and using the Command
Tool, send a job using the Windows Driver, or send data directly to a port. After the print job is
received by the printer, click "OK" in the "Confirm" window to upload the data into the file shown in
"File Name" on the host computer. Another option is to click "Cancel" in the "Confirm" Window which
takes the printer out of Capture mode.

Ignore AUTOFR

The EGL AUTOFR command can be used for automatic form printing. This feature requires having
an AUTOFR file present in the flash memory which will execute by default at power-up. There is a
possibility that it could create an infinite loop. Discontinue use of the feature if desired.
By using the "Ignore AUTOFR" button, AUTO FORM will not be executed during the next power-up
cycle. This gives the user an opportunity to delete the AUTOFORM file stored in the printer.

Password Setup

Once the printer is configured, the company or IT group may not want the configuration to get
accidentally modified by the operator. This can be accomplished by setting a password. The
password is stored in the printer like other configuration items.
Click the "Password Setup" button to open the "Password Setup" window (see Figure 30). Once the
old password is verified, a new password can be accepted.
Figure 30. Password Setup Window
IMPORTANT: A password is required to access the printer. If you forget your password,
contact the Printronix Auto ID Customer Support Center (page 121).
101