Materials - ABB ACS355 series User Manual

390 Technical data
Shock
(IEC 60068-2-27,
ISTA 1A)
Free fall

Materials

Drive enclosure
Package
Disposal
Applicable standards
•
EN ISO 13849-1:
2008
•
IEC/EN 60204-1:
2006
•
IEC/EN 62061:
2005
•
IEC/EN 61800-3:
2004
•
IEC/EN 61800-5-1:
2007
•
IEC/EN 61800-5-2:
2007
•
UL 508C
Not allowed
Not allowed
• PC/ABS 2 mm, PC+10%GF 2.5...3 mm and PA66+25%GF
1.5 mm, all in color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 mm, thickness of coating
20 micrometers
• extruded aluminum AlSi.
Corrugated cardboard.
The drive contains raw materials that should be recycled to preserve
energy and natural resources. The package materials are
environmentally compatible and recyclable. All metal parts can be
recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most
recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors
and printed circuit boards can be landfilled. The DC capacitors
contain electrolyte, which is classified as hazardous waste within the
EU. They must be removed and handled according to local
regulations.
For further information on environmental aspects and more detailed
recycling instructions, please contact your local ABB distributor.
The drive complies with the following standards:
Safety of machinery - Safety related parts of control systems - Part 1:
general principles for design
Safety of machinery. Electrical equipment of machines. Part 1:
General requirements. Provisions for compliance: The final
assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Adjustable speed electrical power drive systems. Part 3: EMC
requirements and specific test methods
Adjustable speed electrical power drive systems – Part 5-1: Safety
requirements – Electrical, thermal and energy
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements. Functional.
UL Standard for Safety, Power Conversion Equipment, third edition
According to ISTA 1A.
2
Max. 100 m/s
2
(330 ft/s ), 11 ms.
76 cm (30 in)
According to ISTA 1A.
2
Max. 100 m/s
2
(330 ft/s ), 11 ms.
76 cm (30 in)