ABB ACS355 series User Manual page 163

The function operates on a 2 ms time level
Speed
1 2 3 4
Phase Jog Start
cmd cmd
1-2 1 0
2-3 1 0
3-4 0 0
4-5 0 0
5-6 1 0
6-7 1 0
7-8 x 1
8-9 x 1
9-10 0 0
10-11 0 0
11-12 x 1
12-13 x 1
13-14 1 0
14-15 1 0
15-16 0 0
x = state can be either 1 or 0
Note: The jogging is not operational when the drive start command is on.
Note: The jogging speed overrides the constant speeds.
Note: The jogging uses ramp stop even if parameter
selection is COAST.
Note: The ramp shape time is set to zero during the jogging (ie, linear ramp).
Jogging function uses constant speed 7 as jogging speed and
acceleration/deceleration ramp pair 2.
5 6 7 8 9
Description
Drive accelerates to the jogging speed along the acceleration ramp of the
jogging function.
Drive runs at the jogging speed.
Drive decelerates to zero speed along the deceleration ramp of the
jogging function.
Drive is stopped.
Drive accelerates to the jogging speed along the acceleration ramp of the
jogging function.
Drive runs at the jogging speed.
Normal operation overrides the jogging. Drive accelerates to the speed
reference along the active acceleration ramp.
Normal operation overrides the jogging. Drive follows the speed
reference.
Drive decelerates to zero speed along the active deceleration ramp.
Drive is stopped.
Normal operation overrides the jogging. Drive accelerates to the speed
reference along the active acceleration ramp.
Normal operation overrides the jogging. Drive follows the speed
reference.
Drive decelerates to the jogging speed along the deceleration ramp of the
jogging function.
Drive runs at the jogging speed.
Drive decelerates to zero speed along the deceleration ramp of the
jogging function.
Program features 163
10 11 12 13 14 15 16
2102 STOP FUNCTION
t