Contents Of This Manual - ABB ACS355 series User Manual

22 Introduction to the manual

Contents of this manual

The manual consists of the following chapters:
• Safety (page 17) gives safety instructions you must follow when installing,
commissioning, operating and servicing the drive.
• Introduction to the manual
audience, purpose and contents of this manual. It also contains a quick
installation and commissioning flowchart.
• Operation principle and hardware description
principle, layout, power connections and control interfaces, type designation label
and type designation information in short.
• Mechanical installation
check the delivery and install the drive mechanically.
• Planning the electrical installation
the motor and the drive and select cables, protections and cable routing.
• Electrical installation
and the compatibility with IT (ungrounded) and corner-grounded TN systems as
well as connect power cables and control cables.
• Installation checklist
and electrical installation of the drive.
• Start-up, control with I/O and ID run
well as how to start, stop, change the direction of the motor rotation and adjust the
motor speed through the I/O interface.
• Control panels
display fields and tells how to use the panel for control, monitoring and changing
the settings.
• Application macros
together with a wiring diagram showing the default control connections. It also
explains how to save a user macro and how to recall it.
• Program features
settings, actual signals, and fault and alarm messages.
• Actual signals and parameters
parameters. It also lists the default values for the different macros.
• Fieldbus control with embedded fieldbus
controlled by external devices over a communication network using embedded
fieldbus.
• Fieldbus control with fieldbus adapter
controlled by external devices over a communication network using a fieldbus
adapter.
• Fault tracing (page 349) tells how to reset faults and view fault history. It lists all
alarm and fault messages including the possible cause and corrective actions.
• Maintenance and hardware diagnostics
(this chapter, page 21) describes applicability, target
(page 33) tells how to check the installation site, unpack,
(page 49) tells how to check the insulation of the assembly
(page 59) contains a checklist for checking the mechanical
(page 75) describes the control panel keys, LED indicators and
(page 107) gives a brief description of each application macro
(page 121) describes program features with lists of related user
(page 179) describes actual signals and
(page 27) describes the operation
(page 39) tells how to check the compatibility of
(page 61) tells how to start up the drive as
(page 313) tells how the drive can be
(page 339) tells how the drive can be
(page 369) contains preventive