ABB ACS355 series User Manual page 202

202 Actual signals and parameters
All parameters
No. Name/Value
1208 CONST
SPEED 7
0.0...599.0 Hz /
0...30000 rpm
1209 TIMED MODE
SEL
EXT/CS1/2/3
Description
Defines constant speed (or drive output frequency) 7.
Constant speed 7 is used also as jogging speed (see
section Control of a mechanical brake
fault functions (3001 AI<MIN FUNCTION
COMM ERR).
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
speed 7 is used also as jogging speed. See section
of a mechanical brake
Selects timed function activated speed. Timed function can
be used to change between the external reference and
constant speeds when parameter
SEL selection is TIMED FUNC 1
TIMED FUN1&2.
When parameter 1201 CONST SPEED SEL
FUNC 1 ... TIMED FUNC
external speed reference or constant speed. 1 = timed
function active, 0 = timed function inactive.
Timed function 1...4 Operation
0
1
When parameter 1201 CONST SPEED SEL
FUN1&2, timed functions 1 and 2 select an external speed
reference or constant speed. 1 = timed function active, 0 =
timed function inactive.
Timed Timed
function 1 function 2
0 0
1 0
0 1
1 1
on page 159) or with
and
setting is SCALAR: FREQ. Constant
on page 159.
1201 CONST SPEED
... TIMED FUNC 4
4, this timed function selects an
External reference
Speed defined by par.
SPEED 1
Operation
External reference
Speed defined by par.
SPEED 1
Speed defined by par.
SPEED 2
Speed defined by par.
SPEED 3
Def/FbEq
E: 50.0 Hz
U: 60.0 Hz
3002 PANEL
9904 1 = 0.1 Hz
/ 1 rpm
Control
CS1/2/3/4
or
= TIMED 1
1202 CONST
= TIMED
1202 CONST
1203 CONST
1204 CONST