Ac500 Modbus Macro - ABB ACS355 series User Manual

AC500 Modbus macro

The AC500 Modbus application macro configures the ACS355 drive communication
and control parameters to be applicable with the pre-engineered Starter kit for
AC500-eCo PLC and ACS355 drive over STD Modbus connection (FMBA-01
adapter).
The macro is available in ACS355 drives with firmware version 5.03C or later.
To activate the macro, set parameter
(10).
Drive
9902 APPLIC MACRO
X3
FMBA-01
adapter
Data flow
Control word (CW)
References
Status word (SW)
Actual values
Parameter R/W
requests/responses
Application macros 117
to AC500 MODBUS
AC500-eCo PLC
Modbus
Other
devices
FMBA-01
Drive
Process I/O (cyclic)
Service messages
(acyclic)