Diagnostics - ABB ACS355 series User Manual



Diagnostics

Actual signal
Groups 01 OPERATING DATA
04 FAULT HISTORY
Motor identification
The performance of vector control is based on an accurate motor model determined
during the motor start-up.
A motor Identification magnetization is automatically performed the first time the start
command is given. During this first start-up, the motor is magnetized at zero speed
for several seconds to allow the motor model to be created. This identification method
is suitable for most applications.
In demanding applications a separate Identification run (ID run) can be performed.

Settings
Parameter 9910 ID RUN
Additional information
... Lists of actual signals
Program features 137