Usb Hid Via 3610; Activate Usb Hid & Select Keyboard Type - CipherLab 1660 User Manual

2.3 USB HID VIA 3610

For USB HID, connect 3610 to the USB port of PC, and then connect the scanner to 3610.
Run any text editor on your computer, and the scanned data will be transmitted to the
computer.
HID Settings
Keyboard Type
Digits Layout
Capital Lock Type
Capital Lock State
Alphabets Transmission
Digits Transmission
Inter-Function Delay
Send "NR" to Host
2.3.1 ACTIVATE USB HID & SELECT KEYBOARD TYPE
When USB HID interface is activated, you will have to select a keyboard type to complete
this setting. By default, BT HID is activated on the 1660 scanner, and the keyboard type
is set to PCAT (US).
1) Read the label above to activate USB HID and select a keyboard type.
2) Read the "Decimal
of desired keyboard type.
3) Read the "Validate" label on the same page to complete this setting.
Activate USB HID & Select Keyboard Type ...
Value" label on page 171. Refer to the table below for the number
Chapter 2
Defaults
PCAT (US)
Normal
Normal
Off
Case-sensitive
Alphanumeric keypad
0 (ms)
Disable
Update
Selecting Output Interface
51