H.pb - Proportional Heating Band Or Hysteresis In On Off Control - gefran 650 Installation And Instruction Manual

4.13.8. H.PB - Proportional heating band or hysteresis in ON-OFF control
Acronym
H.PB HEATING PROPORTIONAL BAND OR ON/OFF HYST
The parameter shows and sets the proportional heating band or hysteresis in the ON-OFF control, calculated as a per-
centage of full scale of the main input.
Unit of measurement:
Options: 0.0...999.9
4.13.9. H.IT - Integral heating time
Acronym
H.IT HEATING INTEGRAL TIME
The parameter shows and sets the integral heating time.
Unit of measurement:
Options: 0.00...99.99
4.13.10. H.DT - Derivative heating time
Acronym
H.DT HEATING DERIVATIVE TIME
The parameter shows and sets the derivative heating time.
Unit of measurement:
Options: 0.00...99.99
4.13.11. H.P.HI - Maximum limit of heating power
Acronym
H.P.HI HEATING POWER HIGH LIMIT
The parameter shows and sets the maximum limit of heating power.
Unit of measurement:
Options: 0.0...100.0
4.13.12. H.P.LO - Minimum limit of heating power
Acronym
H.P.LO HEATING POWER LOW LIMIT
The parameter shows and sets the minimum limit of heating power.
Not available for dual action. The power of PID heating/cooling control (called dual action) is limited by the values of
H.P.HI and C.P.HI.
Unit of measurement:
Options: 0.0...100.0
80208G_MHW_650-1250-1350_01-2017_ENG
Scrolling message
%
Scrolling message
Minutes
Scrolling message
Minutes
Scrolling message
%
Scrolling message
%
4. CONFIGURATION
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
87