Pid.g.r - Selecting The Parameter Group To Be Confi Gured - gefran 650 Installation And Instruction Manual

4.14.1. PID.G.R - Selecting the parameter group to be configured
Acronym
PID.G.R PID PARAMETERS GROUP NUMBER
The parameter shows and sets the parameter group to be configured, identified by its number.
Unit of measurement:
Options: 1...PD.G.N
4.14.2. H.PB - Proportional heating band or hysteresis in ON-OFF control
Acronym
H.PB HEATING PROPORTIONAL BAND OR ON/OFF HYST
The parameter shows and sets the proportional heating band or hysteresis in the ON-OFF control, calculated as a per-
centage of full scale of the main input.
Unit of measurement:
Options: 0.0...999.9
4.14.3. H.IT - Integral heating time
Acronym
H.IT HEATING INTEGRAL TIME
The parameter shows and sets the integral heating time.
Unit of measurement:
Options: 0.00...99.99
4.14.4. H.DT - Derivative heating time
Acronym
H.DT HEATING DERIVATIVE TIME
The parameter shows and sets the derivative heating time.
Unit of measurement:
Options: 0.00...99.99
4.14.5. H.P.HI - Maximum heating power
Acronym
H.P.HI HEATING POWER HIGH LIMIT
The parameter shows and sets the maximum limit of heating power.
Unit of measurement:
Options: 0.0...100.0
80208G_MHW_650-1250-1350_01-2017_ENG
Scrolling message
Number
= Numerical identification where PID.G.N is the total number of groups of parame-
ters set on the MODE submenu
Scrolling message
%
Scrolling message
Minutes
Scrolling message
Minutes
Scrolling message
%
4. CONFIGURATION
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
93