Pasc1 - Setting Level 1 Password 1 - gefran 650 Installation And Instruction Manual

4. CONFIGURAZIONE

4.26. PASC1 - Setting level 1 password 1

Acronym
PASC1 SET PASS1
The parameter lets you set the password for accessing level 1 configuration submenus.
Unit of measurement:
Options: 0...9999
4.27. PASC2 - Setting level 2 password 2
Acronym
PASC2 SET PASS2
The parameter lets you set the password for accessing level 2 configuration submenus.
Unit of measurement:
Options: 0...9999
4.28. FI.CFG - Entering the reset code
Acronym
FI.CFG ENTER DEFAULT CONFIGURATION PASS
The parameter lets you set the code for resetting the controller to factory configuration, which will delete all changes
made.
Default code: 99.
ATTENTION! After you have set code 99, when you press the
described in paragraph "3.2. Sequence at power-on."
Unit of measurement:
Options: 0...9999
136
Scrolling message
Number
Scrolling message
Number
Scrolling message
Number
key the controller runs the Power-on procedure, as
80208G_MHW_650-1250-1350_01-2017_ENG
Submenu Attributes
Level 2 R W
Submenu Attributes
Livello 2 R W
Submenu Attributes
Livello 2 R W