T.spr - Selecting Type Of Remote Setpoint Input - gefran 650 Installation And Instruction Manual

4. CONFIGURATION
4.8.1.

t.SPr - Selecting type of remote setpoint input

Acronym
t.SPr DEFINITION OF REMOTE SETPOINT
The parameter shows and sets the type of remote setpoint input.
Unit of measurement:
Options: 20MA
4-20M
10V
2-10V
1V
C.20MA = Current input 0...20 mA with user calibration
C.4-20 = Current input 4...20 mA with user calibration
C.10V
C.2-10 = Current input 2...10 V with user calibration
C.1V
4.8.2. F.SPr - Selecting remote setpoint input function
Acronym
F.SPr FUNCTION OF REMOTE SETPOINT
The parameter shows and sets the function assigned to the remote setpoint input.
Unit of measurement:
Options: NONE
SETP
POWER = Remote setpoint of Power
RST.PW = Reset power
4.8.3. Lin.S - Selecting linearization type
Acronym
Lin.S CUSTOM LINEARIZATION
The parameter shows and sets the type of linearization used.
Unit of measurement:
Options: NONE
32.STP = 32-step linearization defined on LINRZ menu is applied
4.POIN = 4-point linearization defined on LINRZ menu is applied
4.8.4. FILT.S - Filtro digitale
Acronym
FILT.S DIGITAL FILTER
The parameter shows and sets the value of the digital filter time constant.
Unit of measurement:
Options: 0.00...20.00
70
Scrolling message
-
= Current input in 0...20 mA
= Current input in 4...20 mA
= Voltage input in 0...10 V
= Voltage input in 2...10 V
= Voltage input in 0...1 V
= Current input 0...10 V with user calibration
= Current input 0...1 V with user calibration
Scrolling message
-
= Display only
= Remote setpoint of Process Value (PV)
Scrolling message
-
= No linearization is applied
Scrolling message
-
Submenu
I.SPR
Submenu
I.SPR
Submenu
I.SPR
Submenu
I.SPR
80208G_MHW_650-1250-1350_01-2017_ENG
Attributes
R W
Attributes
R W
Attributes
R W
Attributes
R W