Acronym
C.LO
The parameter shows and sets the minimum analog output value.
You can change the displayed value with the
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter.
Unit of measurement:
Options:
0...65535
4.25.15. C.HIG - Setting analog output maximum
Acronym
C.HIG
The parameter shows and sets the maximum analog output value.
You can change the displayed value with the
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter.
Unit of measurement:
Options:
0...65535
80208G_MHW_650-1250-1350_01-2017_ENG
Scrolling message
and
Converter points
Scrolling message
and
Converter points
keys.
keys.
4. CONFIGURATION
Submenu
Attributes
US.CAL
R W
Submenu
Attributes
US.CAL
R W
135