Rotax 912 iSc Maintenance Manual page 146

Fill the oil tank with approx. 3 l (0.8 gal (US)) of engine oil.
Filling
The following steps have to be carried out after refilling:
Procedure
Step
1
2
3
4
Reconnect negative terminal of aircraft battery.
Purging of the oil system, see chapt. 12-20-00 section: 12.5).
Equipment
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
The oil level in the tank must not drop below the end of
NOTICE
WARNUNG
suction pipe, otherwise air will be sucked in again.
Turn engine by hand in direction of engine rotation to return the oil from the oil
from the oil tank into the engine and into the collection container. The procedu-
re is complete when no more contamination can be discovered.
Control the oil captured during the rinsing process. The rinsing process is
complete when no more contamination can be discovered.
Re-install cleaned oil lines and oil cooler according to the manufacturers
instruction.
Install new oil filter and refill with oil.
Inspect all the equipment in accordance with the Main-
NOTICE
WARNUNG
tenance Manual of the aircraft manufacturer.
Procedure
12-20-00
page 44
January 01/2012