Procedure to clean the oil tank:
Procedure
Step
1
2
3
Step
4
5
6
7
Cleaning the oil tank
Graphic
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Detach the profile clamp (2) and remove the oil tank cover (3) together with the
O-ring (4) and the oil lines.
Remove the inner parts of the oil tank such as the baffle insert (5) and the par-
tition (6).
Clean oil tank (8) and inner parts (5, 6) and check for damage.
Incorrect assembly of the oil tank components might
NOTICE
WARNUNG
cause engine faults or engine damage.
Fit hex.Double ignition screw (1) M12x12 with a new gasket ring (7). Tighten to
25 Nm (18.5 ft.lb).
Safety wire (9).
Reassemble the oil tank by following the same steps in reverse order.
Purge the oil system.
Part
1
Hex. screw M12x12
Procedure
Procedure
Function
12-20-00
page 42
January 01/2012