Rotax 912 iSc Maintenance Manual page 64

Points of Inspection
Check all temperature sensors.
Check all pressure sensors.
Check both exhaust gas temperature sensors.
Check all speed sensors.
Check the throttle control sensor
Check the knock sensor
Check the fuel filter
Gearboxes of series 3 (with overload clutch) and use
of leaded fuel more than 30% of operation.
Inspect overload clutch.
Checking the propeller gearbox.
Drain oil from oil tank.
Check the oil tank and clean the oil tank if contaminat-
ed.
Remove old oil filter from engine and install new oil fil-
ter.
Cut old oil filter without producing any metal chips and
inspect filter mat.
Findings:_________________________________
_______________________________________
Refill oil tank with approx. 3 litres of oil. For oil quality,
see Operators Manual and SI-912 i-001, latest edi-
tion.
(1
In the case more than 30% of operation with leaded fuel e.g.: AVGAS 100 LL 12-20-00
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Operating hours
indicated
14.) Engine displays
15.) Fuel filter (air frame side)
16.) Checking the propeller gear box
every 500 hr.
every 1000 hr.
17.) Oil change
every 50 hr.
every 200 hr.
every 50 hr.
every 50 hr.
every 50 hr.
Interval Chapter
Reference
as
100 hr.
X
X
X
X
X
X
X See MM of the aircraft manu-
facturer.
05-50-00
sec. 2)
12-20-00
sec. 16.1)
(1
X 12-20-00
sec. 12.2),
12.6)
(1
X 12-20-00
sec. 12.2),
12.6)
(1
X 12-20-00
sec. 12.3),
12.4)
(1
X 12-20-00
sec.12.5)
(1
X 12-20-00
sec. 12.6)
sec. 12.2)
Signature
05-20-00
page 16
January 01/2012