Rotax 912 iSc Maintenance Manual page 55

3) Visual inspection
The scope of a visual inspection generally includes, but is not necessarily
General note
limited to, the following.
Normal operating condition, accurate alignment, leak-tightness, cleanli-
Moving
parts
ness, ease of movement, adjustment, mechanical stress, travel, catching,
extreme wear, cracks, corrosion, deformation and other visually evident
damage.
Secure seating, surface condition, cleanliness, deformation, cracks in
Parts
welding seams or due to material fatigue or stress, corrosion and other
visually evident damage.
Cracks, dents, kinks, required flexibility, collapsed lines/hoses, abrasion,
Fuel-, Air- and Oil
lines
cleanliness, secure seating and other visually evident damage.
General cleanliness; loose, corroded or broken terminals; chafed, broken
Wiring
or worn insulation; secure seating, heat damage and other visually evi-
dent damage.
Surface damage, secure seating, locking wire, securing paint and other
Screws and Nuts
visually evident damage.
Filters and screens must be inspected for contamination and potential
Filter
blockages, cleaned and replaced as required.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
05-20-00
page 7
January 01/2012