Oil Pressure Below Minimum Value - Rotax 912 iSc Maintenance Manual

3.9)

Oil pressure below minimum value

General note
NOTE:
Overview and instruction
Graphic
0.5 bar
(50 kPa)
Fig. 4
Oil pressure below minimum oil pressure on the ground
Minimum oil
pressure on the
If noticed on ground, immediately stop the engine and determine the
ground
cause.
- Inspect the complete lubrication system, trace cause and rectify. See
SI-912-005, latest issue.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
If the oil pressure falls below the minimum value, other
NOTICE
WARNUNG
limits are often exceeded, e.g. the oil temperature.
Please observe the relevant instructions.
Any exceeding of the min. admissible oil pressure must be en-
tered by the pilot into the engine log book, stating duration extent
of excessive pressure and pertinent details.
Oil pressure
Proceed as
instructed in
table 5
Proceed as
instructed in table 6
Operating limit (minimum value)
(See Operators Manual 912 i Series)
1 min.
Time
07188
05-50-00
page 16
January 01/2012